A Certified Penntek polyurea floor gives your Everett garage the longest lifespan and lowest lifetime cost, usually in one day, with a limited lifetime warranty backed by Penntek.
We provide concrete coatings, garage floor coatings & epoxy concrete flooring throughout Woodinville WA, Seattle & the Puget Sound
Concrete Floors & Garage Floor Epoxy / Polyurea / Polyaspartic
Residential & Commercial
Get the Longest-Lifespan & Lowest Cost of Ownership from a Certified Penntek Polyurea Floor
Woodinville WA Concrete Coatings & Epoxy Polyurea Garage Floor Coatings
Most epoxy garage floors start lifting, staining and fading within a few years. Cascade installs Certified Penntek polyurea in a day, backed by a limited lifetime warranty from Penntek, so your Everett floor stays good-looking and easy to clean without a do-over.
Wet tires and winter deicer ride into local garages for months. Bare concrete soaks it up, and a cheap epoxy job can lift in a few years and leave you clearing out twice.
Experience the difference of a truly superior concrete coating.
We meet a lot of people whose first coating chipped or yellowed by year 3–5. We moisture and hardness test every slab, and four Everett floors are already on Penntek polyurea.
Searching for Epoxy Floor Contractors? Learn how our Polyurea Floor Coatings lead to a longer lifespan & dramatically better durability.
Three proof points from the material itself and from the concrete coatings already installed around town.
A silane adhesion promoter on diamond-ground concrete lets the pure polyurea basecoat bond chemically at over 1,300 PSI, where typical epoxy just sits on top.
A two-car garage in town read 4.7% and 3.9% moisture at its consult and was finished in Smoke flake in a single day of work.
The non-porous polyaspartic topcoat keeps oil, slush and road film on the surface, so a squeegee and mop handle cleanup.
Looking for an epoxy floor contractor near Woodinville WA? Cascade Coatings would be honored to connect and share how a Certified Penntek Polyurea Floor leads to the longest lasting, most durable, and aesthetically pleasing epoxy floor solution.
Our floors won't delaminate, yellow, blister or chip.
Our superior process & product leads to tremendously longer lifespans.
Confidently utilize your space without the risk of chips, peeling or low-durability.
Our systems are harder, less porous and remain pristine for years longer.
Choosing a cheap floor leads to short lifespans.
If you've been searching for garage floor epoxy around here, you're probably staring at a slab with oil spots, a crack across the middle and dust that never quite goes away. Or you already had an epoxy floor put in and it's flaking at the door. You want something that looks great and stays that way. We install Certified Penntek polyurea, a concrete coating system that does the job people hope epoxy will do.
We'll be upfront. We wrote this page so people searching "epoxy garage floor Everett" or "concrete coating near me" in Everett would find us. What follows is the real information: why coatings fail here, what we put down instead, and four floors in town you can look at.
Typical epoxy relies on a mechanical grip on the surface. It's brittle, it ambers in UV light and it can't move with a slab that shifts. Fast-and-cheap crews make it worse with a quick acid wash instead of grinding, thin coats, and a warranty tied to their own company. Those floors tend to show trouble in years 3–5.
Everett adds its own pressure. It's a working port city with older neighborhoods near the north end and newer subdivisions to the south, and plenty of slabs were poured before vapor barriers were standard. Wet winters keep tires dripping, and county roads get deicer in cold snaps. For background, see Everett on Wikipedia or the City of Everett site. Our post on preventing hot tire pickup covers one of the most common failures.
Ask around Everett and you'll hear it called an epoxy poly garage floor. Fair enough, the steps look the same. The difference comes from four pieces together: a proprietary polyurea blend only certified dealers get, prep by highly trained installers, a warranty backed by Penntek itself and a stronger floor all around.
Penntek starts with diamond grinding and a silane adhesion promoter, so its pure polyurea basecoat, over 99% solids, forms a chemical bond rated over 1,300 PSI. It flexes in Penntek's Stretch Test. On top, a non-porous polyaspartic topcoat resists hot tire pickup, and FadeLock™ UV stability passed a 16-hour QUV test. That adds up to as much as 5x the lifespan of typical epoxy. See it for yourself on our bond and flex test page.
Concrete coatings we've installed in Everett:
The same system also covers two local auto shops, including a 3,000 sq ft service floor in solid Light Grey and one in solid Dark Grey.
We're based in Woodinville, about 16 miles from Everett. Our installation process page walks through each stage.
A bargain coating that peels in year four means a second round of everything: hauling the garage contents out, grinding off what's left and paying for another floor. If the crew that installed it has moved on, the warranty goes with them. A Penntek floor is backed by the manufacturer, which has dealers in 200 markets.
Imagine hosing off January slush and watching the floor come back clean. No dust tracked into the house, no stain from last winter's oil drip, and color that holds by the open door for decades. That's a 30–40 year floor and one decision you don't revisit. Neighbors get the same epoxy alternative in Marysville, Mukilteo, Snohomish and Lake Stevens.
For most garages, polyurea outperforms epoxy. Penntek's basecoat bonds chemically at over 1,300 PSI and flexes, and its topcoat resists hot tire pickup and UV yellowing, for up to 5x the lifespan of typical epoxy.
Your new garage floor is typically installed in one day, and we give you the exact walk-on and parking times for your system before the crew leaves. Plan around that and you're back to normal quickly.
A cracked slab can usually be coated after repair. Cracks get Penntek Mender before the basecoat, like the one running across the Smoke garage, and the flexible basecoat moves with the concrete.
The cost of a concrete coating depends on size, crack and spall repair, whether the slab needs a moisture barrier, old coatings to remove and extras like steps. The free consult ends with an exact quote.
Every slab gets a moisture test at the consult and again on install day. Local readings have run from 3.5% to 4.7%, and high readings get a two-layer moisture barrier system.
The two home garages chose Tidal Wave and Smoke flake. The shops went with solid greys. Browse the colors and finishes to start a short list.
Ready for an epoxy poly floor in Everett? Schedule your free in-home quote or call 425-226-6085. We're licensed, bonded and insured. Thanks for reading past the search result, we'd rather earn your call with real floors than slogans.
Photos & Portfolio
